BISHOP-WISECARVER BHR58E Ball Bearings

Pa:4.07 kN; Cap bolt:2 x 1/2-13 UNC; RG:1/8 NPT; Initial grease fill:107.73 g; R1:42.862 mm; P150°:12.9 kN; N1:19.05 mm; h:36.513 mm; Da:110 mm; Cap bolt, SAE grade:8;

Basic Static Radial Load Rating Co:2900 N; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:17000 rpm; Fillet Radius ra:0.30 mm; B:7.00 mm; Basic Dynamic Radial Load Rating C:4360 N; Oil Speed Rating Open/Shielded n2:20000 rpm; d:25.000 mm; D:37.0000 mm; Sealed Speed Rating n3:1

Dynamic (Cr):9 mm; rs (min):5 mm; d:480 mm; Pu:2680 kN; with tapered bore:700 min-1; D:650 mm; Static (Cor):16.7 mm; Oil:440.310 kN; with cylindrical bore:560 min-1; B:128 mm;

Grease Speed Rating Max. n1:5000 rpm; Oil Mist Speed Rating Max. n3:11000 rpm; D:87.3100 mm; B:41.28 mm; X-L-O Part Number:90-57; Keyway f:3.2 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating Max. n2:7000 rpm; d:41.280 mm; Keyway e:42.2 mm;

Db min.:82 mm; Calculation factor Y0:0.9; D:90 mm; Cb min.:8 mm; Limiting speed:8000 r/min; Ca min.:4 mm; Basic dynamic load rating C:143 kN; rb max.:1.5 mm; Mass bearing:1.03 kg; da max.:51 mm;

Material constant KM:330; d:40 mm; l3 min.:65 mm; Mass rod end:2.2 kg; l7 min.:50 mm; Specific dynamic load factor K:100 N/mm²; w:50 mm; dk:53 mm; α:7 °; h1:145 mm;

Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; D:125.0000 mm; Basic Dynamic Radial Load Rating C:88400 N; Sealed Speed Rating n3:3200 rpm; Basic Static Radial Load Rating Co:80000 N; Accessories:One Seal & Snap-Ring; d:70.000 mm; B:39.70 mm;

ba:31.75 mm; db:100.013 mm; End plug (suffix Y):EPR 13; RG:3/8 NPT; Appropriate attachment bolt size G:0.625 in; P60°:61.4 kN; L:330.2 mm; Stabilizing ring:2 x SR-1517; N1:19.05 mm; A1:88.9 mm;

P150°:34.7 kN; A2:206.375 mm; RG:3/8 NPT; J max.:295.275 mm; N1:19.05 mm; ba:40.481 mm; H2:41.275 mm; Appropriate attachment bolt size G:0.625 in; P90°:60.9 kN; J min.:263.525 mm;

Thread Diameter G:1/2-13; Dimension H1:47.6 mm; Dimension L:104.8 mm; Basic Static Radial Load Rating Co:15300 N; Shaft Diameter D:35 mm; Distance J:82.6 mm; Basic Dynamic Radial Load Rating C:20300 N; Dimension S1:25.4 mm; Insert Bearing IB:Stainless Steel; Width A:38.1 mm;

Basic Static Radial Load Rating Co:13700 N; B:17.00 mm; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.60 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:26000 N; Oil Speed Rating n2:18000 rpm; Grease Speed Rating n1:14000 rpm; D:62.0000 mm;

B:10.5 mm; F:10 mm; d:7 mm; Mass inner ring:0.0031 kg; r, r1,2 min.:0.3 mm;

Da max.:214 mm; da max.:190 mm; B:56 mm; G:M 160x3; D:225 mm; B1:72 mm; Misalignment factor k1:0.113; G1:15 mm; Mass bearing + sleeve:8.9 kg; r1,2 min.:2.1 mm;

d:10 mm; Mass inner ring:0.0074 kg; B:13 mm; F:14 mm; r, r1,2 min.:0.3 mm;

Thrust factor K:1.76; Fatigue load limit Pu:1100 kN; Comparative radial load rating CF:1560 kN; Mass bearing:410 kg; B:269.875 mm; d1 ≈:585 mm; D1 ≈:675 mm; Design variant/feature:TDI/GWIY2; d:536.575 mm; T:269.875 mm;